With the gradual tightening of our packaging and the continuous change of packaging, people also put forward higher demand for capping machine. The pressure of capping machine is strict. From simple manual capping to mechanical automatic capping, high, medium and low-grade products meet the customer needs of different capping machines.
Pursue the stability of the equipment and continuously improve the automation of the equipment, so that our screw capping can serve people better. To prolong the trouble free operation time of our equipment. Make our capping machine more widely used in the whole packaging production line. When people buy the capping machine, they identify the large manufacturers and the product quality.
Today, I summarized four common problems and solutions of the automatic capping machine:
1. The failure of automatic switch caused by the working drift of microswitch or photoelectric switch. For such failure, the working position of position switch or photoelectric switch can be adjusted, or the switch can be changed.
2. The starting current caused by the short circuit between the motor stage winding and the shell and the short circuit between the motor wiring and the grounding wire. On the one hand, this fault can check the motor and check whether the relevant wires are loose at the same time
3. The acceleration time setting of capping machine is too short and the overcurrent fault during acceleration caused by electric shock capacity exceeding the capacity of frequency converter can set F001 value for an appropriate time, and the capacity of electric motor can not be changed at will.
4. The high voltage in operation caused by excessive variation of power supply voltage can be easily solved by adding reactor to the power input or reducing the power supply voltage appropriately.
