In case of abnormal noise or other common faults during the operation of the homogenization emulsifier, the equipment shall be stopped immediately for inspection and shall not be operated until the fault is detected. After stopping operation, the working chamber, stator and rotor shall be clean.
If the process working chamber can be equipped with another insulation layer to cool or heat materials, the coolant or heat transfer oil shall be injected first when starting up. For the thermal insulation interlayer with working pressure ≤ 0.2MPa, it is required to heat or cool to the normal working temperature when processing temperature requirements (such as asphalt), turn and start.
When the homogeneous emulsifying machine is applied in flammable and explosive working environment, explosion-proof motor of corresponding grade shall be selected.
After production and manufacturing, the equipment shall be cleaned to maintain the working efficiency of stator and rotor and protect the mechanical seal. If necessary, design and install a set of annular cleaning equipment.
According to the different media used by consumers, the inlet and outlet filters shall be cleaned regularly to avoid the reduction of feed volume affecting the production efficiency. The materials entering the working chamber must be fluid. Dry powder, lumps and other materials are not allowed to directly enter the machinery and equipment, otherwise the machinery and equipment will be damp and damaged.
The stator and rotor of the homogeneous emulsifying machine shall be maintained regularly. If excessive wear is found, the corresponding parts shall be replaced in time to ensure the actual effect of dispersed emulsification.
During the process of operation, it is found that there is leakage condition on the shaft, so the machine seal pressure should be adjusted after stopping the operation of the equipment.
Before the application of this machine and equipment, corresponding safety production operation procedures shall be formulated to ensure the safety of operators and machines and equipment. Consumers of the electrical control system shall set up a safety protection system, and the electrical motor shall play a safe and reliable grounding device.
The above is all the precautions that should be paid attention to when using homogeneous emulsifying machine to process materials. I hope it will be helpful to you in the future! The uniform emulsifying machine itself is a very advantageous machine and equipment for processing raw materials, but we can't take chances. We need to repair the uniform emulsifying machine at ordinary times and pay attention to the operation methods, so that the service life of the uniform emulsifying machine can be reasonably extended!
Nantong Tongzhou sanhuai Machinery Manufacturing Co., Ltd. focuses on the production and manufacturing of mechanical products, focusing on the development and production of various mechanical products, mainly producing daily chemical machinery, pharmaceutical machinery, packaging machinery, food machinery and various stainless steel products.
